![]() |
Marantz NR1711 8K Slim 7.2 Channel Ultra HD AV Receiver (2020 Model) – Wi-Fi, Bluetooth, HEOS Built-in, Alexa & Smart Home Automation – 8K Videos & Multi-Room Streaming |
![]() |
Marantz SR6015 9.2ch 8K AV Receiver with 3D Audio, HEOS Built-in and Voice Control |
![]() |
Marantz NR1200 AV Receiver, 2-Channel Home Theater Amp, Wi-Fi, Bluetooth, Heos + Alexa, Immersive Movies, Music & Gaming, Auto Low Latency Mode for Xbox One, Smart Home Automation |
![]() |
Marantz NR1510 UHD AV Receiver – Slim 5.2 Channel Home Theater Amplifier, Dolby TrueHD and DTS-HD Master Audio | Alexa Compatible | Stream Music via Wi-Fi, Bluetooth and HEOS Black |
![]() |
Marantz Cinema 60 7.2-Ch Receiver (100W X 7) – 4K/120 and 8K Home Theater Receiver (2022 Model), Built-In Bluetooth, Wi-Fi & HEOS Multi-Room, Supports Dolby Atmos & DTS:X |
![]() |
Marantz SR6015 9.2 Channel 8K AV Receiver with 3D Audio, HEOS Built-in and Voice Control (Renewed) |
![]() |
Marantz SR8015 11.2 Channel AV Receiver with HEOS Music Streaming |
![]() |
Marantz Cinema 50 9.4-Ch Receiver (110W X 9) – 4K/120 and 8K Home Theater Receiver (2022 Model), Built-in Bluetooth, Wi-Fi & HEOS Multi-Room, Supports Dolby Atmos, DTS:X Pro, IMAX Enhanced & Auro 3D |
![]() |
Marantz M-CR612 Network CD Receiver | Wi-Fi, Bluetooth, AirPlay 2 & HEOS Connectivity | AM/FM Tuner, CD Player, Unlimited Music Streaming | Compatible with Amazon Alexa | Black |
Why are old Marantz receivers so expensive?
Vintage audio equipment is expensive due to rarity, and also due to the inherent quality and design required for its lifespan. Vintage gear must be of the highest quality to perform at the highest level decades after it was manufactured.
Are Marantz receivers worth it?
No matter what genre of music you listen to, the sound quality of the Marantz receivers is always on point. Several Marantz receiver reviews confirm that this is true. Only a few brands can achieve this sound effect.
Is Marantz considered high-end?
Denon and Marantz are high end brands. Products from these companies meet the highest modern requirements and satisfy the tastes of the most demanding audiophiles.
Are old Marantz receivers any good?
It is reliable. Two of my vintage Marantz receivers are four decades old, and they are just as reliable as any modern one. These units are built in a similar way to tanks. It will cost you a lot to get something like this.
What class are Marantz receivers?
Every single Marantz receiver has a high-current, class A/B amplifier.
Are Denon and Marantz the same company?
Denon was spun off as a separate company in 2001 with 98% of its capital held by two Japanese companies. The merger of Denon and Marantz formed D&M.
Are old receivers better than new?
Vintage gear has a “cool factor”, but modern amplification and speakers are better in a lot of areas. A new age of audio was introduced with the development of digital-to-analog conversion technology over the last 50 years.
How long should a Marantz receiver last?
After about 10 to 15 years of operation, it’s a good idea to replace the Capacitor on the receiver and amplifier. It is normal for equipment to last for at least 30 to 40 years.
Are stereo receivers obsolete?
A good stereo receiver can be used for a long time, even if it becomes obsolete within a few years. The speaker-level connections are the inputs and outputs of the speaker wires.
Is Marantz considered audiophile?
Marantz is a brand that a lot of people know about. They’re considered to be the first brand of its kind. Since Saul Marantz’s first audio product was sold in New York in the 1950’s, he has been based in Japan.
Which is best Denon or Marantz?
Denon receivers are renowned for their warmer sound and softer sound. The Denon receiver is more suitable for movies than the Marantz receiver.
Is Marantz better than Rotel?
The larger and deeper soundstage of the Rotel gave it a cleaner power than the Marantz. The RAP-1580 gave rise to a musical aura that was quite dark. This was done when listening to music without a sound system.
What does A and B mean on a receiver?
Speaker A and Speaker B can be found on the front panel of some A/V receiver units. The Speaker A output is used to amplify the speakers in the main room while the Speaker B output is used to amplify the speakers in another room.
What is the difference between 2.0 and 2.1 receiver?
What is the difference between a 2.1 and 2.0. A 2.1 soundbar has a total of three channels, two of which are left and right, as well as a separate sub.
What is the most powerful Marantz receiver ever made?
The most powerful receiver of the “monster receiver” era of the 1970s was the Model 2600 from Marantz, which was rated at 330 watt per channel.
Who makes Marantz now?
The manufacturing home of Marantz has been the Shirakawa Audio Works. The facility employs 200 people and is on a journey to find the most musical sound possible.
What is the most powerful Marantz receiver ever made?
The most powerful receiver of the “monster receiver” era of the 1970s was the Model 2600 from Marantz, which was rated at 330 watt per channel.
Is there any value in old stereo equipment?
Stereo resale value can be very high or very low. Modern A/V equipment can be found with little or no resale value, from vintage McIntosh tube amplifier that might be worth a thousand dollars. Send us a message if you would like to see if we would be interested in buying your gear.
What was the original price of the Marantz 8500?
The SR8500 is expected to be delivered in the 4th quarter of 2004. There is more information on the website at www.marantz.com.